Chat with us, powered by LiveChat
  • Professional Strength
  • Won't Shrink or Crack
  • Lifetime Guarantee

Now Available at Select Locations

Key Features

  • 10 year mold & mildew resistance
  • Water resistant in 30 minutes
  • 100% waterproof
  • Maximum flexibility
  • Shrink & crackproof
  • Lifetime guarantee
  • Ideal for sealing around sinks, tubs, showers, back splashes, counter tops, vanities & fixtures
  • Available in White, Clear & Almond 10.1 fl. oz. and White & Clear 2.8 fl. oz.
  • Safe for incidental food contact

Key Features

  • +/- 50% joint movement to withstand extreme joint movement
  • Meets ASTM C920, Class 50
  • Water resistant in 30 minutes
  • 100% waterproof & weatherproof
  • Shrink & crackproof
  • Low odor
  • Lifetime guarantee
  • Ideal for sealing around windows, doors, siding, trim, flashing, gutters, vents & pipes
  • Available in White & Clear 10.1 fl. oz. and White & Clear 2.8 fl. oz.

Helpful Tips

  • 1

    Proper surface preparation is key. Remove any old caulk from the seam or joint by cutting or scraping away. Clean the area with soap and water to remove dirt, dust, grease or debris, and rinse thoroughly. Make sure the area to be sealed is clean and dry to ensure good adhesion.

  • 2

    Want straight lines? Apply painter’s masking tape to either side of the joint before applying the sealant. Remove the tape before the sealant skins over- about 2-5 minutes. To remove, lift the edge up at a 45° angle and pull away from you.

  • 3

    To get a professional-looking finish after the sealant has been applied, smooth the bead of sealant with a caulk finishing tool dipped in water. Do this before the sealant starts to skin over, about 2-5 minutes.

Frequently Asked Questions

No, silicone sealants are not paintable.

Excess uncured silicone sealants should be cleaned up from surfaces or tools with mineral spirits. Cured sealant must be cut or scraped away from surfaces. Use soap and water to clean uncured sealant from skin.

You can expose the bead of sealant to water or rain in just 30 minutes from application and the sealant will not wash out or get permanent marks. This means time saved.

The 2.8 fl.oz. squeeze tube doesn’t require the use of a caulk gun. It is ideal for sealing in tight, hard to reach spots or for smaller jobs.

DAP SILICONE MAX Kitchen & Bath sealant is ideal for sealing out water and moisture in kitchen & bathroom applications such as around sinks, tubs, showers, backsplashes, countertops, vanities and fixtures. This sealant can also be used for commercial/ industrial kitchens in restaurants, hotels, hospitals, schools, etc. It can be used in any phase on the building’s lifecycle: construction, maintenance and/or re-modeling.

The National Sanitation Foundation (NSF) International was founded in 1944 as to help standardize sanitation and food safety. It is the largest global organization that inspects and certifies materials that will come into contact with food and drinking water. This organization develops public health standards & certification programs; tests and certifies products, food and food equipment; and audits and develops education and risk management solutions for food safety.

Public health officials use NSF to ensure commercial food equipment/ prep areas meet sanitary guidelines. NSF Standard 51 “Food Equipment Materials” is used as the guideline for food equipment/ prep areas and breaks down into three zones:

  • Food Zone: Surfaces are intended to be in direct contact with food.
  • Splash Zone: Surfaces subject to spillage where the food in not intended to be consumed.
  • Non-Food Zone: Surfaces other than those in a food or splash zone.

DAP SILICONE MAX Sealant is certified for “Food Zone” surfaces, the most rigorous of the three categories. DAP’s product can also be used in “Splash Zone” and “Non-Food Zone” applications also.

DAP SILICONE MAX is a versatile, all purpose sealant ideal for sealing out air and water in a wide variety of applications such as around windows, doors, siding, trim, flashing, gutters, vents and pipes. It can be used both indoors and out.

Weather and temperature conditions cause a home to expand and contract which can lead to a sealant losing adhesion and cracking. SILICONE MAX is formulated to have maximum flexibility so it's able to withstand extreme joint movement without cracking or losing adhesion. This means a durable, long-lasting seal.